Welcome to my site!
The author labled this mode as a 64-FSK modulation so this is why it is under FSK

QRA64 is an experimental mode intended for EME and other extreme weak-signal applications.
Its internal code was designed by IV3NWV.
The protocol uses a (63,12) Q-ary Repeat Accumulate code that is inherently better than the Reed Solomon (63,12) code used in JT65, yielding a 1.3 dB advantage.
A new synchronizing scheme is based on three 7 x 7 Costas arrays. This change yields another 1.9 dB advantage.

In most respects the current implementation of QRA64 is operationally similar to JT65.

QRA64 does not use two-tone shorthand messages, and it makes no use of a callsign database.
Rather, additional sensitivity is gained by making use of already known information as a QSO progresses - for example, when reports are being exchanged and you have already decoded both callsigns in a previous transmission.
QRA64 presently offers no message averaging capability, though that feature may be added. In early tests, many EME QSOs were made using submodes QRA64A-E on bands from 144
MHz to 24 GHz.

Modulation: 64-FSK
Bandwidth: 111.1 hz
TX duration: 48.4 secs.
Baud: 1.736
Min SNR:-26db based on 2500hz bandwidth noise

eQSL
checkt to see if you have
any eQSL cards!
Enter your callsign to see if you have an eQSL waiting!

LotW
Club Log
I upload logs on the
1st and the 15th
MP3 Player requires JavaScript and the latest Flash player. Get Flash here.
Sound of QRA64
jt65
Image of QRA64