Welcome to my site!

HELL 80


Creator : Siemens company in the 1960's
Description :
Baud rate : 315 (one pixel is 3.175 ms long)
Reading direction : column by column, from down to up and from left to right,
Matrix : height: 9 pixels et width: 7 pixels…so a total of 63 pixels per character. For each character, 2 lines and 2 columns are reserved for the frame.
Speed : 50 wpm (5 characters by second)
Modulation : FSK two tones with a shift between tones of 300 Hz. Normally, the white is at 1625 Hz and the black at 1925 Hz.
Receive mode : USB
Character set : all ASCII printable characters except small letters, carriage return (+ line feed) and error reset character. The used font derived from the one used for FELD HELL,
Shape of pulse : rectangular
Bandwidth : about 800 Hz (due to rectangular shape),
Synchronization : no need, each column is displayed vertically 2 times (but transmitted once)
Pmean/Ppeak : 1
Lowest S/N : - 4 dB
Note 1 : a start-stop mode also exists in the original system
Note 2 : it is added a "DX" and a "Super DX" sub-mods (provided also for FELD HELL and PSKHELL).
eQSL
checkt to see if you have
any eQSL cards!
Enter your callsign to see if you have an eQSL waiting!

LotW
Club Log
I upload logs on the
1st and the 15th
Sound of Hell 80
MP3 Player requires JavaScript and the latest Flash player. Get Flash here.
Image of Hell 80